RECENTLY ACQUIRED at Alard Equipment Corp

A running list of things we've acquired or found available for sale by Alard Equipment Corporation; used food processing and packaging equipment.

Alard Equipment Corporation, 6483 Lake Avenue, Williamson, New York 14589, 315-589-4511 (phone), 315-589-3871 (fax)

See our full General Listings page

Vacuum MIXER-BLENDER video demo, Y3719

2,000 lb Mepaco RIBBON MIXER-BLENDER VIDEO DEMO

y3719_mepaco_vacuum_mixer-blender_2000lb
from Alard Equipment Corporation.

INDUSTRIAL VACUUM MIXER-BLENDER, twin ribbon, 2,000 lb capacity, USDA food grade sanitary all stainless steel...

A 40 cubic foot vacuum ribbon blender with end bottom discharge doors for mixing / blending solids. This heavy duty stainless steel ribbon mixer-blender is configured for vacuum mixing so as to prevent product oxidation to maintain the quality and color of sensitive food products such as meats; as well as to assist in the absorption of salt, spices, and/or marinates in the blending process.

VACUUM BLENDER FEATURES:

  • 40 cubic foot (2000 lbs) capacity horizontal batch mixer with a double-u shaped bottom.

  • Mixing vessel measures 6 feet long by 45 inches wide by 32 inches deep.

  • Food grade stainless steel construction with heavy duty 0.5 inch thick side walls.

  • The agitators have 2 inch wide by 3/8 inch thick ribbons mounted on 3 inch shafts with 3/4 inch spokes.

  • Gasketed / sealed heavy stainless steel lid with dual pneumatic cylinder power lift.

  • Dual 13.5 inch wide by 7.5 inch high opening bottom end discharges with gasketed "spade shaped" pneumatic discharge doors.

  • Independent pneumatic cylinders control left discharge, right discharge & lid lift.

  • Lid and doors are gasketed / sealed and this blending machine was otherwise designed and built for blending under vacuum, (vacuum pump not included).

  • 64 inch infeed height, 32 inch discharge height, on stainless steel legs.

  • Each of the agitator shafts is powered by a 7.5 HP 3 phase drive.


As of this writing, this reconditioned twin shaft vacuum ribbon blender is in stock at ALARD, with two two new drives, in excellent operational, mechanical, electrical, pneumatic, and cosmetic condition, available for immediate shipment.

CALL 315-589-4511 for current availability, and to discuss your particular industrial food process mixing and blending needs.

ALARD item reference #: Y3719

Safeline METAL DETECTOR, vertical opening, 10x7, belt conveyor, Y4185

Safeline FOOD METAL DETECTOR with BELT CONVEYOR,
vertical opening orientation, 10x7,
all food grade stainless steel.

Safeline METAL DETECTOR video demo,
Vertical opening, 10x6.5, with
conveyor belt, Alard item Y4185
.


A refurbished Safeline PowerPhase Plus stainless steel metal detector for food product metal detection, and other industrial packaging line applications, complete with integrated belt transfer stainless steel thru-conveyor with belt-stop alarm reject...


FEATURING:

  • 10 inch high by 6.75 inch wide USABLE opening dimensions with the conveyor belt in place.

  • y4185e_crop_email.jpgVERTICAL aperture opening orientation for standing containers, bottles, jars, cups, tubs, cartons, stand-up pouches or gusseted bottom bags.

  • Stainless steel search head with integral digital touch pad controls.

  • Mounted on a stainless steel transfer thru conveyor frame with 6 inch wide by 48 inch long food grade rubberized belt at a 33.5 inch working height on threaded rod adjustable feet.

  • Right to left product flow direction from the perspective of the operator control position.

  • Belt stop alarm reject.

  • y4185d_crop_email.jpgFood grade sanitary stainless steel, including control box.

  • ½ HP drive geared for 45 feet per minute belt speed.

  • 110 volt single phase (standard household current) electrical input.


As of this writing, this refurbished Safeline conveyorized metal detection system is in stock at ALARD, in EXCELLENT operational, electrical, mechanical & cosmetic condition, available for immediate shipment.

CALL 315-589-4511 for availability and to further discuss your food safety inspection equipment needs.

ALARD item reference #: Y4185

Cantrell 341B SPLIT NUT BLANCHER, Y4152

SPLIT NUT "BLANCHER",
Cantrell Model 341B,
peanut cleaner, separator....

y4152k_crop_email.jpg


A CANTRELL Model 341-B Peanut "Blancher", for splitting peanuts, separating and saving peanut hearts, and cleaning peanuts of skins & trash; from dried or fully roasted peanuts. Manufacturer recommends for yielding the smoothest, cleanest nuts possible for peanut butter, candy and similar products with maximum efficiency...

FEATURING:

  • Peanut grader / cleaner / separator - Separates and saves split peanuts and hearts, discharging them separated from each other; while removing skins, ferrous tramp metals, and trash.

  • Manufacturer rated for up to 2,000 pounds / 1 ton per hour capacity.

  • FDA approved rubber blanching elements remove skins without excessive rubbing or brushing.

  • 6 inch diameter stainless steel infeed at 65 inches high with rotary magnetic separator to protect blanching elements and finished product from damage caused by foreign ferrous material.

  • 1.5HP adjustable blanching belt control ensures effective blanching of all nut sizes.

  • Fractional HP air cleaner fan (removes skins and light trash).

  • Manually adjustable primary and secondary separation valves.

  • y4152c_crop_email.jpg14 inch wide by 48 inch long solid, stainless steel vibrator shaker tray for hearts separation and fines removal.

  • All steel support frame and shrouding.

  • 230/460 volt 3 phase electrical input.


As of this writing, this nut blancher is in stock at ALARD, in excellent operational condition, available for timely shipment.

CALL 315-589-4511 to confirm availability and discuss your nut processing needs.

ALARD item reference #: Y4152

Vanmark Hydrolift DESTONER, Y4086

Vanmark HYDROLIFT DESTONER,
24 inch diameter, stainless steel...

y4086b_crop_email.jpg

The Vanmark Hydrolift Series 2000 VERTICAL DESTONER continuously rinses and removes debris and rocks from root crop vegetables including potatoes, carrots, sweet potatoes, yams, beets, onions, as well as other fruit and vegetable products; while elevating it to the next step in your process.



OPERATION:

The vertical auger creates water turbulence that separates stones and debris from product, removes rock, washes loose dirt away, and acts as a hopper-feeder lifting the product to the discharge point. Separated rock, dirt and debris settle at the bottom of the tank. The Hydrolift also provides your product with a water-rinsing soak bath, where the use of anti-oxidants in the solution can help prevent discoloration and provide a final washing to improve the quality of your finished product.


FEATURES:

  • 24 inch long by 48 inch wide by 26 inch deep stainless steel wet hopper infeed, with water inlet and overflow connections.

  • 16-inch diameter stainless steel vertical screw gently lifts products from the water, with tens of tons-per-hour high capacity.

  • 7 foot 9 inch (93 inch) product discharge height from flanged discharge outlet, on stainless steel legs; --feet must be bolted to the floor for safety / stability.

  • A 4 foot long bolt-on / bolt-off discharge chute comes with it to lowerate product down to a slightly lower discharge height if desired.

  • y4086a_crop_email.jpgFlanged / bolted-on discharge can be reoriented for straight-line, right-angle, left-angle or reverse discharge direction positions. Discharge is presently oriented in an inline / straight-line position (see pictures).

  • Combination all-in-one destoner / vertical elevator / dip tank configuration provides triple-utility in a small footprint for maximum plant floor-space utilization.

  • Manufacturer rates for up to 25,000 lbs per hour product throughput.

  • 12 inch by 17 inch bottom access plate, with water drain port, for cleanout.

  • Food grade all stainless steel construction.

  • 2HP 3-phase drive.


As of this writing, this stainless steel Hydrolift continuous inline screw auger destoner is in stock at Alard, in good operational condition, available for timely shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular industrial food process vegetable washing equipment needs.

Alard item reference #: Y4086

Key Iso-Flo VIBRATORY FEED CONVEYOR, 76x18, Y4180

Key Iso-Flo VIBRATING FEEDER,
vibratory shaker-feeder, food grade, all stainless steel...

y4180k_crop_email.jpg


A Key Iso-Flo vibratory conveyor for even-feeding to downstream equipment, such as a radial combination scale, cutting machine, filling machine, peeling machine, or whatever food processing or packaging equipment.


FEATURING:

  • Vibrating conveyor bed measuring 76.5 inch overall length by 18 inch wide.

  • Dimpled / rigidized stick-resistant stainless steel contact surfaces.

  • 5.5 inch high sidewalls.

  • 9.75 inch diameter bottom end discharge with 4 inch long discharge chute.

  • y4180m_crop_email.jpgFlexible mounting options: Can be equipped with legs for floor mounting, or suspended from above e.g. ceiling mounted to feed a scale, depending on your particular producting line configuration - CALL 315-589-4511 to discuss your particular bulk food product conveyor and feeding requirement.

  • All food grade sanitary stainless steel construction, including support frame.

  • (4) mounting springs (not shown in pictures) included.

  • New style Key Iso-Flo eccentric drive with 1HP 208/230/460 volt 3 phase washdown motor.


As of this writing, this vibrating shaker-feeder is in stock at ALARD, in EXCELLENT operational, mechanical, electrical, and cosmetic condition; available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your industrial food process bulk food conveying and feeding need.

ALARD item reference #: Y4180

DEWATERING SHAKER-GRADER, food grade stainless steel, Y3907

DEWATERING SHAKER-GRADER,
vibrating feeder, food grade, all stainless steel...

y3907e_crop.jpg

An Eriez Magnetics vibratory shaker screen with Eriez "Hi-Vi" magnetic drive circuit, interchangeable screen section for grading, size sorting, fines-removal, sliver removal, solids separation, dewatering, and even-feeding to downstream components...


FEATURES:

  • 19 inch wide by 60 inch long vibratory feeder bed.

  • Rigidized / dimpled surface stick-resistant stainless steel bed and sides.

  • 32.5 inch long solid dimpled infeed section.

  • 24 inch long interchangeable (bolt-in) screen with 1/8 diameter perforations.

  • 3.5 inch dimpled discharge.

  • 6 inch high rigidized surface sides.

  • Catch pan with a 2.75 inch center bottom outlet.

  • All food grade sanitary stainless steel construction.

  • y3907h_crop_email.jpgFully enclosed patented Eriez magnetic drive.

  • Mounted on plastic vibration slats over a stainless steel frame.

  • 27.5 inch working height as currently configured on rubber isolation mount feet for extra smooth operation.

  • All food grade sanitary stainless steel vibrating conveyor, with stainless steel support frame.

  • Wall mount NEMA-4 control panel with ON/OFF switch.

  • 110 volt single phase (household current) electrical input.


As of this writing, this vibrating shaker-grader is in stock at ALARD, in EXCELLENT operational, mechanical, electrical, and cosmetic, available for immediate shipment.

CALL 315-589-4511 to current availability and to discuss your industrial food process grading and solids separation needs.

ALARD item reference #: Y3907

Key Iso-Flo SHAKER-GRADER, vibrating feed conveyor, Y4179

Key ISO-FLO Vibrating DEWATERING SHAKER,
Vibratory GRADER, EVEN-FEED CONVEYOR

y4179f_crop_email.jpg


A Key Iso-Flo vibrating conveyor with quickly interchangeable screens for grading, size sorting, fines-removal, solids separation, dewatering, and even feeding to downstream components...


FEATURING:

  • 36 inch wide by 72 inch long screen AREA with 5 inch high sides.

  • 6 inch long dimpled / rigidized surface solid infeed section.

  • TWO (2) interchangable SCREEN SECTIONS:

    • One (1) removable perpendicular 1/8 inch wedgewire / tri-rod screen panel, 36 inch wide by 31 inch long with 3/16 inch sieve.

    • One (1) removable round perforated (1.25 inch) dimpled / ridigized surface screen panel, 36 inch wide by 31 inch long.

  • 4.5 inch long dimped / ridigized solid surface discharge.

  • 35 inch wide by 24 inch long stainless steel catch pan with 6 inch diameter center bottom outlet under first screen section.

  • All sanitary food grade stainless steel construction.

  • y4179n_crop_email.jpgKey Iso-Flo eccentric drive, with stainless steel shrouded 2HP 3 phase motor.


As of this writing. this vibratory shaker-grader is in stock at ALARD, in EXCELLENT condition, ready to go and available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your particular grading or water reclamation equipment needs.

ALARD item reference #: Y4179



DRUM DUMPER, hydraulic, Y2817


DRUM DUMPER / BARREL DUMPER,
Hydraulic Power included...


y2817r_crop_email.jpg


The National Bulk Equipment Model 2L2-SS barrel dumper / bin dumper is an open container discharger for unloading non-dust generating foods including herbs, spices, purees, pastes, vegetables, fruits or other bulk materials from 55 gallon drums or a multitude of other barrel sizes...



FEATURES:

  • 750 lb. lifting capacity

  • Approximately 130 inch maximum lift height.

  • Accommodates standard 55-gallon drums approximately 23 inch diameter from 28.5 inch to 38.5 inches tall.

  • Hydraulic power pack system included, with 5HP hydraulic pump, and reservoir.

  • y2817t_crop_email.jpgUpper half of barrel chamber has UHMW liner with stainless steel retainer brackets.

  • Frame mounted control panel.

  • Painted steel construction.

  • Gasketed PVC operator control box with on/off, dump, return, emergency stop, and safety lockout switches.


As of this writing, this barrel dumper is in stock at ALARD, in very GOOD condition, available for timely shipment.


CALL 315-589-4511 to confirm availability and discuss your product handling need.

ALARD item reference #: Y2817

Packrite continuous BAG SEALER Y4128


NEW PACKRITE / BANDRITE Model 6000

CONTINUOUS BAND SEALER with STAND


y4128a_crop_email.jpg



The Packrite 6000 BAG SEALER is manufacturer recommended for industrial food process and USDA sanitary food packaging applications, as well as for medical, military, agricultural, and many other flexible bag and pouch sealing applications. It seals most types of barrier materials in addition to straight polyethylene up to 12 mil single thickness or 6 mil single thickness on bags with gussets (24 mil total). Change over from one material to another is done with very little or no adjustment required...

FEATURES:

  • Manufacturer rated for up to 550 inches per minute on up to 10 mil thicknesses.

  • Flat seal, 3/8 inch seal width.

  • Digital temperature control.

  • Left to right product flow.

  • Stainless steel top and side shrouding.

  • Stainless steel adjustable height stand.

  • Stainless steel corrosion resistant bottom shrouding.

  • Variable speed drive (110 volt single phase input).

y4128l_crop_email.jpg

As of this writing, this Packrite continuous-flow bag-sealing machine is in stock NEW at ALARD, fully assembled and operational; a new machine available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your food packaging needs.

ALARD item reference #: Y4128


Waukesha 130-U2 PD PUMP with drive, 3A dairy sanitary Y2330


WAUKESHA UNIVERSAL 2 Series Model 130
SANITARY ROTARY POSITIVE DISPLACEMENT PUMP
with drive and base...


y2330k_crop_email.jpg


A Waukesha Cherry-Burrell sanitary PD twin lobe pump, manufacturer recommended for pumping viscous fluids, slurries, or particulate bearing liquids in industrial food, dairy, canning, bakery, beverage and pharmaceutical processing applications...



FEATURING:

  • 3 inch inlet and discharge ports with sanitary Tri-clamp connections in a horizontal flow orientation.

  • y2330o_crop_email.jpgLarge diameter shafts for greater strength & stiffness. Rotor/shaft connection sealed from the product zone. Non galling Waukesha 88 alloy rotors for tighter running clearences and higher efficiencies.

  • A USDA / 3A Dairy sanitary food grade pump with a T316 stainless steel body, cover and shaft, with easy disassembly for cleaning and sanitation.

  • Coupled to a 15HP 208/230/460 volt 3 phase mechanical drive, geared for 388 RPM at the pump lobes, for up to approximately 98gpm throughput (depending on product viscosity and head pressure, pump curves available on request).

  • Manufacturer rated for up to 600 RPM and 200psi working pressure.

  • Pump and drive mounted together on a stainless steel base with threaded rod adjustable leveling feet.

As of this writing, this Waukesha lobe pump is in stock at Alard, and is in EXCELLENT operational, mechanical, electrical and cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular food grade sanitary pump requirements.

Alard item reference #:Y2330

500 gallon TANK, food grade stainless steel, Y3598


500 GALLON VERTICAL TANK,
food grade stainless steel...


y3598n_crop_email.jpg

A Tasker food grade 500 gallon vertical single wall food grade stainless steel tank...

FEATURING:

  • 64 inch diameter by 37 inch high sides.

  • Shallow cone bottom.

  • Dual hinged covers.

  • Three (3) 2 inch Tri-clamp inlets on top.

  • Two (2) 3 inch Tri-clamp inlets on side at top.

  • 2.5 inch center bottom outlet with Tr-clamp fitting.

  • Food grade sanitary stainless steel construction.

  • y3598j_crop_email.jpgIncludes mount for a clamp-on mixer (mixer not included) for use as a mix tank.

As of this writing, this Tasker 500 gallon tank is in stock at ALARD, being sold AS-IS in good condition, available for immediate shipment.


CALL 315-589-4511 to confirm availability, and to discuss your food processing needs.

ALARD item reference #: Y3598

Turatti DEWATERING CONVEYOR, Y4182


CONVEYOR BELT with liquid catch pan, 14x42,

all stainless steel, for dewatering, washing, inspection...


Turatti DEWATERING CONVEYOR, Y4182
from Alard Equipment Corporation.


A Turatti Model 1580-17-000 DEWATERING CONVEYOR, for solids separation, recovery of liquids, and / or water removal from a wide array of products and applications including fresh and fresh-cut fruits & vegetables. Well suited for handling delicate and/or fragile food products. If configured with water sprays this conveyor can be used as a SPRAY WASHER to rinse, treat, or wet product, for example for increasing freezer tunnel efficiencies. With the inclusion of operator catwalk platforms, this conveyor could also be used as an inspection conveyor.


FEATURES:

  • 42 inch wide by 14 feet 8 inch long plastic woven mesh belt with 1/16 inch perforations.

  • The belt runs between 8 inch high stainless steel sides.

  • 50 inch working height on adjustable legs.

  • Full bottom de-watering pan slopes to 3.5 inch side outlet.

  • Removable dual discharge chute with 13 inch by 15.5 inch dimpled surface.

  • Belt-cleaning stainless steel air manifold bar under the belt at discharge.

  • Sanitary bearings.

  • Food grade sanitary stainless steel construction with safety shrouding.

  • (3) sets of mount points where air knives (not included) or overhead water spray manifolds (not included) could be added.

  • 1HP stainless steel drive motor.

  • 208/230/460 volt 3 phase electrical input.

As of this writing, this Turatti dewatering conveyor is in stock at ALARD, in EXCELLENT condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your food process solids separation and dewatering needs.

ALARD item reference #: Y4182

Urschel Comitrol 1700 Microcut MILL, Y4145


URSCHEL COMITROL PROCESSOR MODEL 1700, 30HP, configured for Microcut head.


y4145a_crop_email.jpg


The Urschel Comitrol 1700 microcut food grade milling machine is manufacturer recommended (with cutting parts specific to application) for particle size reduction of free-flowing products for fruit and vegetable purees, slurries, pastes, patees, mustard, peanut butter, catsup, baby food, horseradish, dressings, textured vegetable protein, gels, ointments, creams, liquefying, dispersing, emulsifying, etc...


SPECIFICATIONS per manufacturer literature:

  • Maximum product input size, in general should not exceed 3/8 inch (9.5mm) or less depending on specific microcut head and impeller used).

  • Continuous operation for uninterrupted production.

  • Food grade USDA sanitary.

FEATURES:

  • Came without a cutting head and impeller, so the machine can be easily completed by bolting on the specific microcut cutting head and impeller combination needed for your particular application: Call 315-589-4511 to dicuss your specific industrial food process particle size reduction need.

  • y4145c_crop_email.jpg Hopper infeed (can optionally be fitted with a pipe infeed for pumpable product applications).

  • Stainless steel construction including support frame.

  • Oil mist system for smooth operation of high-speed cutting head.

  • Factory electrical control panel with safety interlock system.

  • 30 HP brakemotor drive, 208/230/460 volt 3 phase electrical input.

As of this writing, this Urschel mill is in stock at Alard, needing only a cutting head and impeller to buyer specification to be complete, and otherwise in EXCELLENT operational, mechanical, and cosmetic condition, available for immediate shipment.


CALL 315-589-4511
to confirm availability, and to discuss your particular food equipment needs.


Alard item reference #: Y4145


Urschel SLICER, Model OV, Y4164


URSCHEL Model OV cross-cut transverse SLICER,
for elongated food products...


y4164f_crop_email.jpg

Manufacturer rated for producing flat or crinkle cut crosscut slices, aka "coin cuts", from elongated food products such as carrots, celery, cucumbers (pickles), peppers, squash, bananas, pepperoni, leeks, etc.

SPECIFICATIONS:

  • Cutting wheels (change part) available for precise, tons-per-hour industrial fruit and vegetable slicing in thicknesses slices from 1/16 (1.6mm) of an inch up to " to 1 1/3 inch (34mm). Call 315-589-4511 to discuss your particular cutting requirement.

  • Rated for products no more than 2.75 inches (70mm) in diameter or width.

  • Flat or krinkle cut blades and shear edges are available for corrugated or flat slices.

  • One slice is made at a time, which prevents crushing or distortion of the product.

  • An average sized pickle goes through this machine in 1/30 of a second, and is uniformly sliced by knives moving at 95 feet per second. This high speed causes clean slices to be produced, even as the knives lose their sharpness.

  • The machine is not recommended for slicing sticky products, or products with a very high concentration of sugar.

FEATURES:

  • y4164g_crop_email.jpg24 inch long by 15 inch wide stainless steel infeed hopper.

  • V-trough belt aligns and centers products for uniform cross cut slicing.

  • Standard "floppy belt" product hold down mechanism for positive product alignment and stability.

  • Spiral discharge chute gently decelerates the cut slices.

  • Food grade USDA sanitary stainless steel construction including frame.

  • Factory control panel with safety interlock system. 2 HP 208/230 volt 3 phase brakemotor drive.

As of this writing, this Urschel model OV slicing machine is in stock at Alard in EXCELLENT operational, mechanical, electrical, and cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular industrial fruit and vegetable slicing specification.


Alard item reference: Y4164

Lyco Easy-Flow four stage COOLER, Y4132

HIGH SPEED PARICULATE COOLER,
LYCO Easy-Flow, 4-zone...


y4132h_crop_email.jpg


A Four Zone LYCO EASY-COOL CONTINUOUS COOLER, all food grade sanitary stainless steel. Manufacturer recommended for corn, peas, green beans, pasta, rice, proteins, dry beans, cut potatoes, potatoes, onions plus many other vegetables and a multitude of food types and shapes.


Manufacture literature describes a revolutionary design for rapid cooling of particulate food items, which they say can, for example cool cooked-hot pasta products down to 40 degrees Fahrenheit, in a fraction of the time of traditional cooling methods. Each zone is capable of submerging and mixing product in cold well water or chilled water where the product rapidly releases heat.


BENEFITS:

  • Rapid cooling in a small footprint.

  • Dramatically reduced cooling times.

  • Improved food safety AND productivity.

  • Consistent results and uniform end product.

  • Lower freezer and/or refrigeration costs.

  • Heat from the first zone can be recycled to pre-heat blancher or cooker water.


MANUFACTURER LITERATURE describes this 4-stage Lyco Easy-Flow continuous cooler SPECIFICATIONS as:

  • High-capacity, up to 5,000 pounds an hour capacity.

  • As a high-speed particulate cooler able to cool most products like pasta, rice, or vegetables, from 200 degree Fahrenheit down to 40 degrees Fahrenheit in approximately 30 seconds.

  • As a flash chiller able to cool food products from 200 degrees Fahrenheit to 70 degrees Fahrenheit in 10 seconds.

y4132y_crop_email.jpgFEATURING:

  • Removable wedge-wire dewatering screens.

  • Four (4) Alpha Laval LKH40 sanitary centrifugal pumps, one for each water plenum zone, each with Sterling stainless steel shrouded 5HP motors.

  • Four (4) Yaskawa 1000 Nema 4 variable speed drive controllers in stainless steel enclosures with hinged access covers mounted along the side of the cooler.

  • Overall Dimensions: 190 inch long by 60 inch wide by 63 inch high.

  • 44 inch infeed height, 29.5 inch discharge height.

  • All food grade sanitary stainless steel construction with open, sanitary, easy to clean design.

  • Stainless steel electrical feed box with safety-lock-out, 460 volt 3 phase electrical input.


As of this writing, this Lyco flash chiller / plenum cooler is in stock at ALARD, in EXCELLENT operational, mechanical, and cosmetic condition, ready to go and available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your food processing needs.


Alard item reference #: Y4132

POTATO WEDGE CUTTER VIDEO DEMO, Y3099


TURATTI SPEAR CUTTER / WEDGE SLICER
for fruit and vegetable products...

POTATO WEDGE CUTTING machine, Turatti spear cutter, Alard item Y3099
from Alard Equipment Corporation.



Turatti Model 1411-26 slicer, for cutting pickle spears, or potato wedges, and spear or wedge cutting other vegetable and fruit products without pits or stones.



FEATURES:

  • (8) 12 inch diameter powered stainless steel blades for cutting (8) wedge slices. Could cut quarters rather than eights, by removing every other blade.

  • All food grade stainless steel, including blade drive arms, shrouds and stands.

  • Tubular stainless steel frame and base-plate, currently configured for 58 inch infeed height and 26 inch discharge height, on adjustable feet.

  • Base frame has a 35.5 inch wide clearance between legs to accommodate placement of a tote beneath the discharge to catch product.

  • 360 degree safety shrouding, with latching access doors for convenient maintenance access. PVC control box with safety interlock, cuts power to the machine if any of the access doors are unlatched / opened.


As of this writing, this pickle spear slicer / french fry potato wedge cutter just arrived into stock at Alard, has been test run and is in good operational condition available for immediate shipment as-is; or can be cleaned and serviced prior to shipment to assure excellent operational, mechanical, and cosmetic condition; per buyer specification.

CALL 315-589-4511 to confirm availability, and to discuss your particular industrial food process fruit and vegetable cutting machine needs.



Alard item reference #:Y3099

Vanmark Hydrolift VERTICAL SCREW FEEDER, Y4109

Vanmark HYDROLIFT VERTICAL SCREW FEEDER / DESTONER,
24 inch diameter, 16 foot lift, stainless steel...

y4109e_crop_email.jpg

The Vanmark Hydrolift Series 4000 vertical screw elevator / destoner, provides a space-saving vertical feed conveyor which also provides a final rinse and settling point for rock and stone removal from root crop vegetables including potatoes, carrots, sweet potatoes, yams, beets, onions, as well as other fruit and vegetable products; while elevating it to the next step in your process.


OPERATION:

The vertical auger creates water turbulence that separates stones and debris from product, washes loose dirt away, and acts as a hopper-feeder lifting the product to the discharge point. Separated rock, dirt and debris settle at the bottom of the tank for manual removal. The Hydrolift also provides your product with a water-rinsing soak bath, where the use of anti-oxidants in the solution can help prevent discoloration and provide a final washing to improve the quality of your finished product.

FEATURES:

  • Combination all-in-one destoner / vertical elevator / dip tank configuration provides triple-utility in a small footprint for maximum plant floor-space utilization.

  • y4109a_crop_email.jpg28 inch long by 16 inch wide by 24 inch deep stainless steel wet hopper infeed, with water inlet and bottom drain connections.

  • 16-inch diameter auger allows for a wide range of food products, with high throughput tons-per-hour capacity. Currently configured for right-angle discharge.

  • 192 inch (16 foot) product discharge height with a flanged outlet opening, on stainless steel support frame; --feet must be bolted to the floor for safety / stability.

  • Discharge can be repositioned for straight-line, right-angle, left-angle or reverse discharge positions.

  • Food grade all stainless steel construction.

  • 2HP 3-phase drive.

As of this writing, this stainless steel Hydrolift continuous inline screw auger destoner is in stock at Alard, in good operational condition, available for timely shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular industrial food process vegetable washing equipment needs.

Alard item reference #: Y4109

STEAM BLANCHER, 20x2 belt, stainless steel, Y4159

STEAM BLANCHER,
hydrostatic fruit and vegetable
thermal blanching tunnel,
20x2 belt, food grade stainless steel ...

VEGETABLE BLANCHER, steam belt blanching tunnel, Y4159
from Alard Equipment Corporation
.

An A.K. Robins BELT STEAM BLANCHER for steam blanching of vegetable and fruit products prior to freezing or canning in an industrial food processing operation.


FEATURES:

  • 20 foot long by 26 inch wide stainless steel wire mesh belt with fine 1/8 inch wide openings runs through the steam tunnel.

    • 2 foot long open belt infeed and discharge sections, with 16 foot length of travel in steam / steam vapor exposure.

  • Top and bottom steam headers (over and above the belt), each with (2) zone input connections for live steam injection.

  • (5) hinged top covers, each of which rests on all four sides in a system of hydrostatic-water-seal troughs, to prevent steam from escaping.

  • Fully INSULATED body and covers.

  • Vinyl flaps at each end to keep steam from escaping from the infeed and discharge.

  • (6) side cleanout access for under-belt cleanout access (3 per side).

  • Steam stacks at each end.

  • All food grade USDA sanitary stainless steel construction.

  • Highly polished "scalloped" stainless steel cosmetic finish.

  • 3/4HP 3 phase mechanical variable speed drive geared for 18 to 80 inches per minute belt speed.


As of this writing, this hydrostatic steam belt blancher is in stock at Alard, in EXCELLENT operational, mechanical, and cosmetic condition, available for immediate shipment.


CALL 315-589-4511
to confirm availability, and to discuss your specific fruit and vegetable blancher requirement.

Alard item reference #: Y4159

LAMINAR OVERFLOW BRINER, Y1092

OVERFLOW BRINER LAMINAR FLOW FILLER video demo.

Laminar OVERFLOW BRINER, Y1092
from Alard Equipment Corporation.


Laminar overflow BRINE FILLER with THROUGH-CONVEYOR, all stainless steel food process filling machine for adding brine on an industrial process vegetable canning line...



FEATURES:

  • 10' long conveyor body with drive sprockets for 4" wide perforated plastic interlocking chain type belt (Intralox type) leading to a 67" long overflow weir section. 32" conveyor working height on adjustable feet.

  • Overflow weir head tank is 67" long by 10" wide by 9" deep with full-length pipe infeed for even dispersion.

  • Beneath the conveyor is a bottom overflow-catch and recirculation tank 72" long by 15" wide by 26" deep.

  • The through-conveyor is complete with a 3 phase volt fixed speed drive (can easily be rewound or replaced for US voltage).

As of this writing, this machine is in the process of being refurbished to EXCELLENT operational, mechanical and cosmetic condition, and is available for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular food process brine filling needs.


Alard item reference #: Y1092


Urschel G-A DICING MACHINE, Y4148

URSCHEL Model G-A DICER,
strip cutter, slicer, French fry cutter..
.


y4148a_crop_email.jpg

A three dimensional continuous cutting machine, manufacturer rated for products input sized up to 5.5 inches (140mm) in any dimension. Manufacturer recommends for uniform dices, straight French fry strips, and slices from a variety of soft ripe fruits and brittle root vegetables, such as potatoes, apples, broccoli stems, citrus peel, papaya, peaches, celery, carrots, and many others; producing clean, uniform, high-quality tons-per-our output.


Three cutting dimensions...

  • Slice thickness: From 1/8 inch / 3.2mm, up to 5/8 inch / 16mm, (knob adjustable).

  • Circular knifes: from 1/8 inch (3.2mm) to 3 inches (76mm); (spacers and number of knives determine).

  • Crosscut knife spindle spacing: from 9/32 inch (7.1mm) up to 3 inches, (change part).

  • By removing the crosscut knife spindle and / or the circular knife spindle(s), the Urschel G can also cut strip cuts (two-dimensional cuts) such as for french fries, and slices (single dimensional cut).

  • We can complete this machine with cutting parts to fit most standard cutting specifications: Please call 315-589-4511 to tell us your cut size requirement!



This cutting machine FEATURES...

  • y4148k_crop_email.jpgStainless steel slice shell and impeller with 10 inch slice shell opening.

  • Food grade sanitary stainless steel product contacts, spindles, guards, shrouds and tubular stainless steel frame.

  • Stainless steel factory control box with safety interlock system.

  • Standard 2 HP 3 phase drive.


As of this writing, this Urschel dicer is in stock, in VERY good operational, mechanical, electrical and cosmetic condition, available for timely shipment.

CALL 315-589-4511 to confirm availability, and to discuss your industrial volume food cutting machine / equipment needs.

Alard item reference #: Y4148

Urschel H-A DICER, Alard item Y3983



Refurbished URSCHEL Model H-A DICER,
cube cutter, strip cutter, slicer...

y3983e_crop_email.jpg


A three dimensional cutting machine, manufacturer rated for products input sized up to 5.5 inches (140mm) in any dimension. Manufacturer recommends for uniform dices, strips, and slices from a variety of soft ripe fruits and brittle root vegetables, such as potatoes, beets, lettuce, cabbage, broccoli, cauliflower, sweet potatoes, squash, carrots, mushrooms, turnips, cantaloupe, endive, tomatoes, cucumbers, horseradish, apples grapefruit, citrus peel, papaya, pineapple, peaches, celery, rutabagas, melon rind, and many other foods; producing clean, uniform, high-quality tons-per-our output.


Three cutting dimensions:


  • Slice thickness: From 1/8 inch / 3.2mm, up to 3/4 inch / 19.1mm, (knob adjustable).

  • Circular knifes: from 1/8 inch (3.2mm) to 3 inches (76mm); (spacers and number of knives determine).

  • Crosscut knife spindle (change part) spacing: from 3/4 inch (19.1mm) up to 1.75 inches (44.5mm).

  • By removing the crosscut knife spindle and / or the circular knife spindle(s), the Urschel HA dicer can also cut strip cuts (two-dimensional cuts) such as for french fries, and slices (single dimensional cut).

  • An optional "G" kit is available to extend the range of this machine to overlap with the Urschel model G, and we can otherwise complete this machine with cutting parts to buyer specification: Please call 315-589-4511 to discuss your particular food process cutting machine need!


FEATURES:

  • y3983q_crop_email.jpgStainless steel product contact surfaces, including slice shell and impeller with 10 inch slice shell opening, cutting spindles and knives.

  • USDA sanitary model designation with food grade stainless steel construction including spindle arms, guards, shrouds and tubular stainless steel frame.

  • Factory control box with safety interlock system.

  • Standard 2 HP 208/230/460 volt 3 phase drive.


As of this writing, this reconditioned Urschel dicer is in stock, in EXCELLENT operational, mechanical, electrical and cosmetic condition, needing only to be fitted with cutting parts to buyer specification prior to a timely shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular industrial food process cutting machine needs.

Alard item reference #:Y3983

Urschel OC SLICER, Alard item Y2562

URSCHEL Model OC CROSSCUT BIAS SLICER...


y2562l_crop_email.jpg

.

Urschel OC TRANSVERSE SLICER for making angled coin cuts of oblong fruits and vegetables in a variety of crinkle or flat bias slices.


Manufacturer SPECIFICATIONS:

  • Slice thickness from 1/16th inch (1.58mm) to 1.75 inch (44.5mm), with cutting wheel and belt timing set to slice.

  • Maximum product input size of 2.5 inches (63.5mm) in diameter.

  • Flat slices or crinkle cut cutting setups are available; --call 315-589-4511 to discuss your cutting spec.

FEATURES:

  • y2562r_crop_email.jpgANGLED cutting wheel configuration, for bias-cut slicing.

  • Safety interlock system with factory control panel; --cuts power to the machine is safety shrouding is removed.

  • 88 inch long food grade white rubberized product feed belt.

  • All food grade stainless steel and Urschalloy product contact surfaces, guards and shrouds, with tubular stainless steel support frame and legs.

  • 208 / 230 / 460 volt 3 phase electrical input drive motors (one for the belt, one for the cutting head), with brakemotor on cutting head.


Manufacturer recommended for pickles, carrots, celery, plantains, rhubarb, okra, potatoes, zucchi, squash, bread, and a variety of other vegetable and fruit products.

As of this writing, this LIKE NEW Urschel OC slicer is in stock at Alard in very good condition, available for timely shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular industrial food process fruit and vegetable cutting machine needs.

Alard item reference #: Y2562

Urschel J9-A cutting nopales cactus, Y3974

URSCHEL MODEL J9-A DICER / STRIP CUTTER
VIDEO DEMO - cutting nopales cactus...



y3974 urschel j9a cutting nopales cactus
from Alard Equipment Corporation.



A reconditioned Urschel J9-A two-dimensional belt-fed cutter, manufacturer rated for firm products up to 1/2 inch thick, with included feed roll, or thicker if product is compressible. This dicing machine / strip-cutter, chopping machine produces a variety of dices and strips. Manufacturer literature recommends for meats (frozen tempered chicken breast, beef jerky, bacon strips, sausage crumbles), baked goods (pita chips, flour tortilla strips. bread dices for croutons, brownies) & vegetables such as peppers, celery, broccoli, and parsley; and as a high-capacity greens chopper for mustard greens, collard greens, kale, and spinach.

The Urschel J9A is a high-capacity tons-per-hour cutting machine designed for very clean, precise cuts, in uninterrupted continuous operation in industrial food processing applications; including USDA meat and poultry applications, with easy cleanup and maintenance.

This machine FEATURES:

  • 9 inch wide product in-feed belt.

  • Currently complete except for cutting parts to be prepared and installed per buyer requirement: CALL 315-589-4511 to discuss your cutting specifications!
    • Circular knives can be configured from cuts for 3/16 inch to 2 inches (4.8mm to 50.8mm).
    • Crosscut spindles are available for cuts from 1/16 inch to 3 inches.

  • Food grade USDA sanitary steel construction; including frame, guards, shrouds & cutting spindles.

  • Complete with factory electrical panel with operator controls & safety interlock system.

  • 5 HP 208/230/460 volt 3 phase brake-motor drive.

As of this writing this Urschel cube cutter / strip cutter is in stock at ALARD, in EXCELLENT operational, mechanical, and electrical condition, needing only change parts per your specification installed prior to shipment.

CALL 315-589-4511 to confirm availability and to discuss your particular industrial food process cutting machine need.

ALARD item reference #: Y3974

FMC HANDPACK volumetric FILLER video demo, Z8711

FMC HAND PACK FILLER,
with AUTOMATIC filling hopper,
with TELESCOPIC VOLUMETRIC pockets
for adjustable volume filling of cans and jars.



FMC HANDPACK volumetric filling machine Z8711
from Alard Equipment Corporation.

A 26 pocket automatic volumetric filling machine set for 300 diameter cans or 3 inch diameter jars, manufacturer rated for filling "anything or everything that can be handled except an artcile that must be placed in the can or jar in a precise position".This machine includes an automatic filling hopper for granular and particulate products, such as cut string beans, diced vegetables, sliced vegetables, shoestring or french style items, mixed vegetables, lentils, wet and dry beans, coffee beans, and the like.



FEATURES:

  • TELESCOPIC POCKETS - Crank-adjustable telescoping volumetric pockets allow for easy and continuous adjustability of fill volume, giving this filler / depositor the versatility of depositing one ingredient in a partial fill, or filling the container completely with one item.

  • AUTOMATIC or MANUAL - The FMC Hand Pack rotary filler model filler features an open stainless steel filling disc which allows flexibility for automatic and/or manual operation. With the automatic filling hopper removed, some difficult products, such as uncut green beans, asparagus, and/or delicate products such as whole peeled tomatoes can be filled by hand.

  • Stainless steel infeed and discharge disks allow for maximum flexibility in line layout.

  • Clockwise rotation.

  • 1 7/8" diameter feed tubes.

  • Brush-off rail, with UHMW sweep, to assure that any excess product is swept off to provide accurate, uniform fills and prevent overfills.

  • All food grade stainless steel product contacts, with UHMW plastic cut-off valve plates.

  • Heavy-duty painted steel frame and body.

  • 208/230 volt 3 phase mechanical variable speed drive.

As of this writing, this food grade volumetric granular filler is in stock at Alard, in very good operational condition, available for timely shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular food equipment needs.

Alard item reference #: Z8711

Urschel slicer, model GKS, video demo, Y2110

Refurbished URSCHEL Model GKS SLICER,
for flat or crinkle slice cuts...



Y2110 Urschel model GKS SLICER video demo
from Alard Equipment Corporation.


A simple, yet rugged, high-speed centrifugal slicer manufacturer recommended for cutting a wide variety of produce including beets, potatoes, carrots, cabbage, lettuce, eggplant, cucumbers, pickles, cranberries, apples, pears, strawberries, tomatoes, and peaches. Engineered for continuous tons-per-hour industrial-scale production, in a simple design for easy clean-up & maintenance. Able to slice flat strip cuts as well as crinkle strip cuts.

SPECIFICATIONS, per manufacturer literature:

  • Slice thickness easily (knob) adjustable for slice thicknesses from 1/16 inch (1.6mm) up to 5/8 inch (16mm).

  • Accepts product input up to 5.5 inches (140mm) in any dimension. Larger products must be precut. Large heads of cabbage, for example, must be quartered before slicing.

  • The GKS SLICER can cut either flat or crinkle slices.

  • Krinkle cuts made with the Model GKS will have 3 1/3 crinkles to the inch, with a depth of .070 inch (1.8mm).

  • Throughput capacity depends on slice thickness and density, so for example, root crop vegetables are rated for 12,000 lbs per hour on for ¼ inch slices, while capacity on ¾ inch slices will be 36,000 pounds per hour. On products which are lighter than root vegetables, the capacity will be lower in accordance with the density of the products.

  • At reduced capacities, this slicer will make slab cuts / sandwich cuts, slicing the full length of oblong products such as potatoes, carrots, and pickles, but the products must not be longer than 5 inches.

  • This slicer will not cross-cut elongated products, the Urschel Model OV, which we also have in stock as of this writing, is used for crosscut slicing. Call 315-589-4511 to discuss your particular industrial food process slicing machine specification.

  • Some products may need to be frozen or tempered for firmness to be succesfully cut with this machine. Call 315-589-4511 to discuss your particular industrial food process cutting machine application.

OPERATION:

  • Product is fed thru a hopper into a rotating impeller, for high-capacity continuous production.

  • Centrifugal force holds product against inside of slice case as impeller blades carry product past slicing knife.

  • Distance between adjustable case gate and slicing knife determines slice thickness.

  • Slicing case has a corrugated inner surface capable of producing krinkle-cut slices.

FEATURES:

  • Food grade sanitary stainless steel product contacts and stainless steel frame.

  • Stainless steel 7 inch opening slice shell.

  • This cutting machine is for industrial food processing applications, with capacity for 3,000 to 36,000 lbs per hour depending on product and cut size.

  • 2HP 208/230/460 volt 3 phase drive.



As of this writing, this reconditioned Urschel slicer is in stock at ALARD, in EXCELLENT operational, mechanical, electrical & cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability and to discuss your food processing needs.

ALARD item reference #: Y2110

y3850 SPIN DRYER video demo

BROTHERS LEGROW CENTRIFUGAL VEGETABLE SPIN DRYER,
large 200 lb capacity...


Brothers SPIN DRYER DEMO, Y3850
from Alard Equipment Corporation.


A Brothers Legrow high-capacity model food grade batch centrifuge system for leafy and/or pre-cut produce products, such as fresh cut lettuce, onions, shredded carrots, and other similar fresh bagged salad type products...


FEATURES:

  • Includes (6) 30-inch diameter by 2 foot deep 9.8 cubic foot removable dryer baskets, each with 3/16 inch perforations, manufacturer rated for 220 lbs capacity.

  • Includes (6) stainless steel basket dollies, as well as a lifting yolk for raising and lowering the baskets by (not included) overhead hoist.

  • Food grade stainless steel construction including all product contacts, and stainless steel base plate connected via rubber vibration isolation mounts.

  • Hinged pneumatic-power-assisted stainless steel lid with basket hold-down wheel.

  • Safety interlock system prevents machine from starting, and de-powers the machine if lid latch / cover is opened.

  • Gasketed PVC control box with programmable variable speed control system; including reverse-thrust / dynamic brake controls.

  • 5 HP 3 phase drive motor.


As of this writing, this Brothers high-capacity batch spin dryer is in stock at Alard in EXCELLENT operational, electrical, pneumatic, mechanical and cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular pre-cut produce / fresh-cut vegetable food processing and packaging equipment needs.

Alard item reference #:Y3850

Refurbished Urschel model H DICER, Y3982

URSCHEL Model H DICER,
cube cutter, strip cutter, slicer...


y3982m_crop_email.jpg


A three dimensional cutting machine, manufacturer rated for products input sized up to 5.5 inches (140mm) in any dimension. Manufacturer recommends for uniform dices, strips, and slices from a variety of soft ripe fruits and brittle root vegetables, such as potatoes, beets, lettuce, cabbage, broccoli, cauliflower, sweet potatoes, squash, carrots, mushrooms, turnips, canteloupe, endive, tomatoes, cucumbers, horseradish, apples grapefruit, citrus peel, papaya, pineapple, peaches, celery, rutabagas, melon rind, and many other foods; producing clean, uniform, high-quality tons-per-our output.


Three cutting dimensions:

  • Slice thickness: From 1/8 inch / 3.2mm, up to 3/4 inch / 19.1mm, (knob adjustable).

  • Circular knifes: from 1/8 inch (3.2mm) to 3 inches (76mm); (spacers and number of knives determine).

  • Crosscut knife spindle (change part) spacing: from 3/4 inch (19.1mm) up to 1.75 inches (44.5mm).

  • By removing the crosscut knife spindle and / or the circular knife spindle(s), the Urschel H can also cut strip cuts (two-dimensional cuts) such as for french fries, and slices (single dimensional cut).

  • An optional "G" kit is available to extend the range of this machine to overlap with the Urschel model G, and we can otherwise complete this machine with cutting parts to buyer specification: Please call 315-589-4511 to discuss your particular food process cutting machine need.


FEATURES:

  • Stainless steel product contact surfaces, including slice shell and impeller with 7 inch slice shell opening, cutting spindles and knives.

  • y3982g_crop_email.jpgAll food grade stainless steel construction including spindle arms, guards, shrouds and tubular stainless steel frame.

  • Factory control box with safety interlock system.

  • Standard 2 HP 208/230 volt 3 phase drive.

As of this writing, this reconditioned Urschel dicer is in stock, in the process of being reconditioned to EXCELLENT operational, mechanical, electrical and cosmetic condition, needing only to be fitted with cutting parts to buyer specification prior to a timely shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular industrial food process cutting machine needs.

Alard item reference #:Y3982

Urschel Comitrol 1500 video demo y3044

URSCHEL COMITROL PROCESSOR, Model 1500, 30HP.

Urschel Comitrol Processor model 1500, Alard item Y3044
from Alard Equipment Corporation.

Manufacurer recommended industrial tons-per-hour food processing applications, for milling, fine grinding, high-shear emulsifying, homogenizing, and finishing; of viscous and liquid food products, such as fruit nectars, fruit butters, condiments, sauces, dressings, pulps, gelatins, soy milk, baby formula, tomato ketchup, barbecue sauces, vegetable purees, beverage concentrates, and creams and ointments.


FEATURES:

  • 2 inch threaded pipe infeed.

  • Microcut cutting head with Unicut impeller (a range of parts are available for this machine, CALL 315-589-4511 to tell us YOUR cutting specification!).

  • 3 inch Tri-Clamp discharge outlet.

  • All food grade stainless steel construction.

  • 45 inch infeed height, 38 inch discharge height, on Urschel standard stainless steel support frame.

  • Interlock safety system, with operator control panel, and brakemotor drive.

  • 30 horsepower 208/230/460 volt 3 phase brakemotor drive.


As of this writing, this Urschel Comitrol 1500 grinder is in stock at Alard, in good condition, available for timely service and shipment.


CALL 315-589-4511
to confirm availability, and to discuss your particular food process particle size reduction needs.

Alard item reference #:Y3044

ELEVATING CONVEYOR, cleated belt, food grade, stainless steel, 12x8, Y4030

ELEVATING CONVEYOR,
cleated belt incline feed conveyor with hopper,
food grade, stainless steel, 12x8...

y4030m_crop_email.jpg

A 12 inch wide by 8 foot long stainless steel elevating belt feed conveyor with infeed hopper, for food processing applications...

FEATURES:

  • 6.5 foot discharge height as configured.

  • y4030s_crop_email.jpg32 inches long by 30 inches wide by 20 inches deep in-feed hopper with a rubber flapper to prevent product from escaping out the bottom.

  • Food grade interlocking plastic chain type cleated belt with 2 inch high cleats on 12 inch centers.

  • The belt runs between 3 inch high stainless steel sides.

  • Stainless steel drive shafts with plastic sprockets.

  • 38 inch infeed height into hopper, 83 inch discharge height.

  • 42 inch square tubular stainless steel stand for stability.

  • All food grade staniless steel construction.

  • 1/2 HP drive, with 208/230 volt 3 phase variable speed controller.


As of this writing this inclined belt conveyor is NEW in stock at Alard, ready to go and available for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular food equipment needs.

Alard item reference #:Y4030

ROTARY ACCUMULATING DISC, 60 inch diameter, stainless steel, Y3037

60 inch diameter
ROTARY ACCUMULATION TABLE,
ACCUMULATING DISC / FEED DISK /
UNSCRAMBLER / TURNTABLE,
food grade stainless steel...

y3037d_crop_email.jpg


An ELF Model 60TT 5 foot diameter stainless steel turntable accumulating disc, pack-on disc, pack-off disc, for food packaging line container handling applications.

FEATURING:

  • Food grade stainless steel disk-top, stainless steel base / cabinet, with tubular stainless steel frame and legs.

  • Underside wood disk-backing for strength, complimented by load-bearing trunnions e.g. for heavy, full / glass containers.

  • Presently set at a 32 inch working height on on locking rolling casters for portability.
  • y3037e_crop.jpgComplete with adjustable 2-bar stainless steel guide rails with plastic runner inserts, for accumulation of, jars, cans, bottles, trays, cartons, tubs, or buckets.

  • Complete with variable speed controller for gearmotor drive, 110 volt single phase electrical input (standard household current).



As of this writing, this 5 foot diameter pack-on / pack-off disk is in stock at Alard, in EXCELLENT operational, mechanical electrical, and cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular food pakcaging equipment needs.

Alard item reference #:Y3037